Great performance. Easy to use. Versatile use. The LSJ Z01 combines all this in a system that flexibly adapts to your requirements.
Internal or external lubrication? Why decide when you can have both. No matter what comes your way, with the LSJ Z01 you're ready for anything.
Thanks to the double reservoir volume, your process will run like greased and up to 400 hours with only one oil filling!
Installed in a control cabinet, this system is optimally protected against external influences such as dust and splash water. Thus, the LSJ Z01 runs as cleanly as your process.
General Information
- Universal device for internal and external lubrication.
- Cooling channel cross-section at the tool outlet from 0.6mm2 to max. 50mm2
- Spindle size up to max. HSK 63
- Manual setting of parameters via the pressure regulators
- Visual level monitoring
- Setting of aerosol saturation via 1 nozzle
- Switching on and off via customer's machine
- Unit installed in control cabinet
- Tank capacity 6 liters (max. filling quantity 4 liters)
Technical Data
| Dimensions (W x L x H): | 380 x 350 x 630 mm |
| Weight: | 30 kg |
| Pressure at the tool: | 14 – 15,5 bar* |
| Aerosol outlet: | Ø 10 mm (NW 8) |
*Depending on: Cooling channel cross-section and viscosity of the liquid
Interfaces
| Pneumatic | |
|---|---|
| Pressure range: | 6 - 16 bar |
| Compressed air connection: | Ø 10 mm (NW 8) |
| Air supply: (depending on cooling channel cross section) | Min: 250 Nl/min Ideal: 1200 Nl/min Max: 3000 Nl/min |
| Electric | |
|---|---|
| Power supply: | 24 V (Control signal via machine) |
| Power consumption: | 0,5 A |
| Communication: | 24 V DC |
Accessories and options
- Floor rack aluminum
- Level sensor with 3 contacts
- Automatic filling 20 liters via customer PLC or HPM Ecmos 2.0
- HPM Ecmos 2.0 with plug-in power supply 24 V
- Nozzles for external lubrication (if internal lubrication is not possible)
- Expandable with high pressure module for doubling the hall pressure
